TOKENONLINE Global Worldwide Service

Ceramic Filters

Download Entire Ceramic Filters Catalogue PDF file (544KB).

For more than two decades, piezo technology has been instrumental in the proliferation of solid state electronics. A view of the future reveals that even greater expectations will be placed on piezoelectric material in the area of new applications and for more stringent performance criteria in current products. Traditionally, nearly all low and high-end AM / FM commercial radios use piezo band-pass devices. However, applications are also found in cordless telephones, cellular systems, 2-way communications, and the television industry.


As a world leader in the development of piezo technology, Token Electronics had been able to develop specialized piezo materials which when combined with an advance design have resulted in a complete line of practical, inexpensive piezo devices for entertainment and communications applications.

CERAMIC FILTER - FM SERIES
Chip Ceramic Filters - LTCS10.7M Series

Chip Ceramic Filters - LTCS10.7M Series

Chip LTCS10.7M series (Compatible to Murata SFECS10M7) for FM-receivers are small, high performance and super thin (1.5mm max.).
Type: Chip. Frequency Range: 10.7 MHz. Murata (P/N): SFECS10M7.

LTCS10.7M Series - PDF (317KB)

SMD Ceramic Filters - LTCA/CV10.7M Series

SMD Ceramic Filters - LTCA/CV10.7M Series

Chip LTCA/CV10.7M (Compatible to Murata SFECV10M7 Ceramic Filter AM) has been made smaller, thinner and in a chip configuration for surface mounting.
Type: Chip. Frequency Range: 10.7 MHz. Murata (P/N): SFECV10M7.

LTCA/CV10.7M Series - PDF (307KB)

FM Receiver Ceramic Filters - LT10.7M Series

FM Receiver Ceramic Filters - LT10.7M Series

LT10.7M Series (Compatible to Murata SFE10M7 FM-IF) FM Receiver are monolithic devices which utilize the energy-trapped thickness vibration-mode.
Type: Dip. Frequency Range: 10.7 MHz. Murata (P/N): SFE10M7 FM-IF.

LT10.7M Series - PDF (329KB)

Low Loss Ceramic Filters - LT10.7M A10 Series

Low Loss Ceramic Filters - LT10.7M A10 Series

LT10.7M A10 Series Low Loss Type (Compatible to Murata SFE10M7 Ceramic Filter A10) has been made smaller, thinner and in a chip configuration for surface mounting.
Type: Dip. Frequency Range: 10.7 MHz. Murata (P/N): SFE10M7 A10.

LT10.7M A10 Series - PDF (329KB)

Wide/Narrow Band-width Ceramic Filters - LT10.7M Series

Wide/Narrow Band-width Ceramic Filters - LT10.7M Series

Wide/Narrow Band-width LT10.7M Series (Compatible to Murata Ceramic Filter SFE10M7 DBS Receiver) has been made smaller, thinner and in a chip configuration for surface mounting.
Type: Dip. Frequency Range: 10.7 MHz. Murata (P/N): SFE10M7 DBS.

LT10.7M Series - PDF (329KB)

CERAMIC FILTER - TV/VCR STAGE
Ceramic Filters TV/VCR Stage - LT MB Series

Ceramic Filters TV/VCR Stage - LT MB Series

LT MB Series (Compatible to Murata Ceramic Filters SFE MB series) are a high selectivity filter for 2 channel multi-sound TV.
Type: Dip. Frequency Range: 4.5~6.5 MHz. Murata (P/N): SFE MB.

LT MB Series - PDF (290KB)

TV/VCR Stage High-Selectivity - LTT MA Series

TV/VCR Stage High-Selectivity - LTT MA Series

LTT High-Selectivity Series (Compatible to Murata Ceramic Filter SFT Series) are 4 element devices that offer more selectivity than the conventional LT series (Murata SFE).
Type: Dip. Frequency Range: 4.5~6.74 MHz. Murata (P/N): SFT.

LTT MA Series - PDF (295KB)

TV/VCR Stage Low Spurious - LTS MCB/MDB Series

TV/VCR Stage Low Spurious - LTS MCB/MDB Series

LTS MCB/MDB Series TV/VCR Stage with Low Spurious (Compatible to Murata Ceramic Filter SFSH MCB/MDB) use thickness shear vibration mode and are suitable for Multiplex Sound TV in America.
Type: Dip. Frequency Range: 4.5~6.5 MHz. Murata (P/N): SFSH MCB/MDB.

LTS MCB/MDB Series - PDF (281KB)

CERAMIC FILTER - COMMUNICATION
AM Ceramic Filters - LTP Series

AM Ceramic Filters - LTP Series

LTP for AM (Compatible to Murata Ceramic Filter SFU450/455kHz ) are designed to address the needs of standard AM filtering requirements.
Type: Dip. Frequency Range: 450~470 KHz. Murata (P/N): SFU450/455KHz.

LTP Series - PDF (326KB)

AM Ceramic Filters - LTZ Series

AM Ceramic Filters - LTZ Series

LTZ Series AM (Compatible to Murata Ceramic Filter SFZ Series) are designed to address the needs of standard AM filtering requirements and are recommended for use in low cost products where economically, efficient designs are critical.
Type: Dip. Frequency Range: 450~470 KHz. Murata (P/N): SFZ.

LTZ Series - PDF (327KB)

Radio-Cassette Recorder Filters - LT Miniature Series

Radio-Cassette Recorder Filters - LT Miniature Series

LT MINIATURE (Compatible to Murata Ceramic Filter PFB Series) is one of the most recommendable intermediate type, having such distinctive features as high selectivity, high stability and adjustment-free operation.
Type: Dip. Frequency Range: 450~470 KHz. Murata (P/N): PFB.

LT Miniature Series - PDF (299KB)

Ceramic Filters for Communication - LTB Series

Ceramic Filters for Communication - LTB Series

Ceramic Filter LTB series comprises small, high performance. Their innovative construction is perfect for shrinking mobile communication products such as pocket pagers and cellular phones.
Type: Dip. Frequency Range: 450~470 KHz. Murata (P/N): -.

LTB Series - PDF (271KB)

Ceramic Filters for Communication - LT Series

Ceramic Filters for Communication - LT Series

Ceramic Filter LT465A for Radio-Cassette Recorder were designed to address the needs of standard radio cassette recorder requirements.
Type: Dip. Frequency Range: 450~470 KHz. Murata (P/N): -.

LT465A Series - PDF (308KB)

Search-Stop Signal Detection - LZU Series

Search-Stop Signal Detection - LZU Series

LZU for Search-stop Signal Detection (Compatible to Murata Ceramic Filter BFU Series) are specifically designed for signal detection circuitry used in applications such as that found in the search-stop functions of electronically tuned radios.
Type: Dip. Frequency Range: 450 KHz. Murata (P/N): BFU.

LZU Series - PDF (277KB)

IF Communication Filters - LTC 455/450 Series

IF Communication Filters - LTC 455/450 Series

LTC 455/450 U/W Series (Compatible to Murata Ceramic Filter CFUCG Series) comprises small, high performance, thin (4.0mm) consisting of 4 ceramic elements.
Type: Chip. Frequency Range: 455/450 KHz. Murata (P/N): CFUCG.

LTC 455/450 Series - PDF (356KB)

Compact Size Ceramic Filters - LTM 455/450 Series

Compact Size Ceramic Filters - LTM 455/450 Series

LTM 455/450 U/W for Communication (Compatible to Murata Ceramic Filter CFUM/WM 455/450 Series) are miniaturized versions of the Murata CFU/CFWS lines. These compact, highly selective characteristics are recommended for use in applications ranging from two-way radio to auxiliary filters in high class transceivers.
Type: Dip. Frequency Range: 455/450 KHz. Murata (P/N): CFUM/WM.

LTM 455/450 Series - PDF (326KB)

Selective Communication Filters - LT 455/450 U/W Series

Selective Communication Filters - LT 455/450 U/W Series

LT 455/450 U/W for Communication (Compatible to Murata Ceramic Filter CF, SF series) are 4-element and 6-element devices connected in ladder form. These highly selective filters are designed to address the G.D.T.
Type: Dip. Frequency Range: 455/450 KHz. Murata (P/N): CF, SF.

LT 455/450 U/W Series - PDF (309KB)

CERAMIC DISCRIMINATORS
FM Ceramic Discriminator - JTCV10.7M Series

FM Ceramic Discriminator - JTCV10.7M Series

JTCV10.7M For FM are resonated devices that offer adjustment free audio detection in both wide and narrow bandwidths.
Type: Chip. Frequency Range: 10.7 MHz. Murata (P/N): -.

JTCV10.7M Series - PDF (142KB)

FM Ceramic Discriminator - JT10.7M Series

FM Ceramic Discriminator - JT10.7M Series

JT10.7M For FM (Compatible to Murata Discriminator CDA 10.7) are resonated devices that offer adjustment free audio detection in both wide and narrow bandwidths.
Type: Dip. Frequency Range: 10.7 MHz. Murata (P/N): CDA10M7.

JT10.7M Series - PDF (301KB)

Ceramic Discriminators for Communication - JTC Series

Ceramic Discriminators for Communication - JTC Series

JTC for Communication (Compatible to Murata Discriminator CDBC) consists of wide band piezoelectric resonator. It is ideal for mobile communication equipments due to its small size and light weight.
Type: Chip. Frequency Range: 455 KHz. Murata (P/N): CDBC.

JTC Series - PDF (241KB)

Ceramic Discriminators for Communication - JTM Series

Ceramic Discriminators for Communication - JTM Series

JTM for Communication (Compatible to Murata Discriminator CDB/CDBC/CDBM) consists of wide band piezoelectric resonator. It is ideal for mobile communication equipment due to its small size and light weight.
Type: Dip. Frequency Range: 455 KHz. Murata (P/N): CDB/CDBC/CDBM.

JTM Series - PDF (272KB)

CERAMIC TRAP FOR TV/VCR STAGE
Triple Trap Filters - XT MT Series

Triple Trap Filters - XT MT Series

XT MT Series (Compatible to Murata Trap Filter TPT Series ) consist of 3 wafers with 3 trap frequencies. Recommended for Multi standard sets.
Type: Dip. Frequency Range: 4.5~6.5 MHz. Murata (P/N): TPT.

XT MT Series - PDF (291KB)

Double Trap Filters - XT MW Series

Double Trap Filters - XT MW Series

XT MW Series (Compatible to Murata Trap Filter TPWA Series) consist of 2 wafers with 2 trap frequencies. Recommended for Multi standard set. Features with good performance of attenuation and space saving with 3-terminal type.
Type: Dip. Frequency Range: 4.5~6.5 MHz. Murata (P/N): TPWA.

XT MW Series - PDF (274KB)

Chrominance Carriers Trap Filters - XT MJ/MB Series

Chrominance Carriers Trap Filters - XT MJ/MB Series

XT MJ for Chrominance Carrier (Compatible to Murata Trap Filter TPS MJ Series) are band reject device used for video and sound IF attenuation.
Type: Dip. Frequency Range: 3.58~6.5 MHz. Murata (P/N): TPS MJ.

XT MJ/MB Series - PDF (272KB)

Trap Filters TV/VCR Stage - XT MB Series

Trap Filters TV/VCR Stage - XT MB Series

XT MB for TV/VCR Stage (Compatible to Murata Trap Filter TPS MB Series) are band reject type used for video and sound IF attenuation.
Type: Dip. Frequency Range: 4.5~6.5 MHz. Murata (P/N): TPS MB.

XT MB Series - PDF (268KB)


Piezo Electric Devices Precaution Usage

The piezo by itself is not a clock, so it must be used with circuitry built into the IC to create the clock signal. The clock circuit consists of the passive resonator, quartz or ceramic piezo, and an active amplifier that is built into the IC. Please refer to this page for Piezo Electric Devices Precaution Usage.

Piezo Electric Devices Precaution Usage PDF (220KB)

Redial Taping Dimensions

Redial Taping Dimensions of Ceramic Filters, Resonators, Discriminators, and Trap Filters.

Redial Taping Dimensions PDF (298KB)