TOKENONLINE Global Worldwide Service
TO-220 Power Resistors - RMG30 Series

TO-220 Power Resistors - RMG30 Series

power resistor

Features

  • 30 Watt at 25°C Case Temperature Heat Sink Mounted.
  • TO-220 Style Power Package.
  • Single Screw Mounting to Heat Sink.
  • Molded Case for Protection and Easy to Mount.
  • Isolated Case.
  • Non Inductive.

Applications:

  • Gate Resistors in Power Supplies.
  • Snubbers.
  • Load and Dumping Resistors in CRT Monitors.
  • Terminal Resistance in RF Power Amplifiers.
  • Voltage Regulation.
  • Low Energy Pulse Loading.
  • UPS.
Derating Gurve
TO-220 Power Resistors Derating Curve

Dimensions (Unit: mm)
TO-220 Power Resistors Dimensions
Type W H T T1 T2 B B1 C D D1 G R
RMG30 10.15
~
10.67
16.00
~
16.52
2.92
~
3.44
0.40
~
0.60
1.52
~
2.04
11.43
~
13.97
2.54
~
4.06
4.82
~
5.34
0.66
~
0.86
1.14
~
1.40
2.92
~
3.44
3.08
~
3.28

Electrical Characteristics Specifications
Resistance Range Resistance Tolerance TCR(PPM/°C)
0.05Ω~1Ω ±5.00%
±10.0%
-
2Ω~5Ω ±1.00%
±5.00%
±10.0%
±200
5Ω~10Ω ±1.00%
±5.00%
±10.0%
±100
±200
11Ω~10KΩ ±0.50%
±1.00%
±5.00%
±10.0%
±50
±100
±200
  • Operating Voltage:350V Max.
  • Dielectric Strength: 1800VAC
  • Insulation Resistance: 10GΩmin.
  • Working Temperature Range:-65°C to +150°C
  • Resistance Value < 1Ω is Available
Environmental Characteristics
Test Item Specification Test Method
Temperature Coefficient of Resistance 10Ω and above, ±50ppm/°C
1Ω and 10Ω, (±100ppm)/°C
Referenced to 25°C, ΔR taken at +105°C
Short Time Overload Δ R±0.3% 2 times rated power with applied voltage not to exceed 1.5 times maximum continuous operating voltage for 5 seconds.
Load Life Δ R±1.0% MIL-R-39009,2,000 hours at rated power.
Humidity (Steady State) Δ R±0.5% MIL-STD-202F, Method 103B
40°C, 90~95%RH, RCWV 1.5hours ON, 0.5hours OFF. total 1000~1048 hours.
Thermal Shock Δ R±0.3% MIL-STD-202, Method 107G.
-65°C~150°C,100 cycle
Terminal Strength Δ R±0.2% MIL-STD-202, Method 211, Cond.A(Pull Test) 2.4N.
Vibration, High Frequency Δ R±0.2% MIL-STD-202, Method 204, Cond.D.
  • Lead Material: Tinned Copper.
  • Maximum Torque: 0.9 Nm.
  • Without Heat Sink, When in Free Air at 25°C, the RMG30 is Rated for 2.25W.
  • The Case Temperature is to be used for the Definition of the Applied Power Limit.
  • The Case Temperature Measurement Must be Made with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink.
  • Thermal Grease Should be Applied Properly.
How to Order
RMG30JPD1K
123456
1 Part Number : TO - 220 Power Resistors
2 Power Rating
CodePower Rating
3030 Watts
3 Resistance Tolerance
CodeResistance Tolerance
D±0.5%
F±1%
G±2%
J±5%
K±10%
4 Package
CodePackage
TTube
PBulk
5 TCR
CodeTCR
D±50ppm/°C
E±100ppm/°C
F±200ppm/°C
-No specified
6 Resistance
CodeResistance
0R10.1Ω
10R10Ω
1K1000Ω
10K10000Ω